VERTICAL TOWED MIXER - TWO AUGERS
MV-30D SERIES
WEIGHING SCALE
Before starting to operate the scale, carefully read its instruction manual, which is
supplied with the mixer.
The scale (1) is located on the front of the mixer, on its
right side. It is mounted inside a protective box (2)
equipped with a polycarbonate front and an articulated
mechanism that allows it to be oriented to guarantee
visibility of the indicator screen depending on if you are
loading the mixer or delivering in bunkers.
The weighing system is provided with three or four
weight cells (4), located at the support points of the tub, a
connection box (5) and an acoustic indicator (3) located in
the protective box of the scale, which warns about the
load of each ingredient of the diet.
The scale is fed through the tractor's power socket.
If the battery option is available, the scale can be directly
connected to it, so it will work at all times regardless of
the state of the machine, allowing the mixer to be loaded
without need to keep the tractor hooked.
For the correct operation of the scale, follow these recommendations:
- Make sure the battery is well charged and its connection to the scale is correct.
Cables must not be pulled, cut or bent; this could lead to breakage over time. The
voltage must not have alterations greater than ± 1 volt
- Avoid hitting or spilling liquids on the screen. Also, reduce speed when driving on
roads in poor condition with the machine loaded, as the sensors can deteriorate,
leading to faulty weighing.
- Do not manipulate the sensors under any circumstances. Any operation on them
must be carried out by TATOMA technical personnel.
Tatoma Ag Equipments Corp. Located in Colcord, OK. Phone (918) 422-4271
- 45 -
