Tatoma EMV-10, Инструкция по эксплуатации

Страница: 66 / 68

TOWED VERTICAL MIXER
7. OPERATING IRREGULARITIES
Any repairs should be carried out by a qualified TATOMA technician.
The necessary steps to be taken should be studied and considered before
commencing any work.
All available documentation must be consulted: drawings, diagrams, etc.
and, once the problem is established, determine which parts of the mixer
must be dismantled and in what order.
Before commencing any maintenance work, if unsure of the task at hand
consult the manufacturer.
If the instruction manual maintenance instructions have been followed
regularly, the mixer should not have incidents where it is immobilized for
long periods of time.
A list of possible incidents that could arise during the use of the
machine, as well as possible causes and repairs, are indicated in the
following table:
Incident Possible cause Repairs
LIGHTING
Blinkers operating to fast
- Burnt fuse
- Burnt bulb
- Change fuse.
- Change bulb.
Lights do not work
- Burnt fuse
- Burnt bulb
- Power supply wire is
disconnected or cut
- Defective ground wire
connection
- Change fuse.
-Change bulb.
- Connect and verify the cable.
- Check tractor's ground wire.
- Change tractor’s ground wire.
CUTTING, MIXING, AND UNLOADING SYSTEM
The folding arm, the
unloading door, or the
folding belt does not
work.
- Mechanical jam of some sort
- Jammed valve due to
contamination particles in the
hydraulic circuit
- No pump pressure
- Check and make sure no
foreign objects are impeding
movement of the referenced
systems.
- Check the valves.
- Dismount and clean the valve or
change it if necessary.
- Check pressure and change
pump if necessary.
Page 61