Tatoma EMV-10, Инструкция по эксплуатации

Страница: 52 / 68

TOWED VERTICAL MIXER
Page 47
4.5. FILTERS
Hydraulic Oil Filter Check
Periodically check the build-up in the hydraulic oil return filter (R) with the
pressure gauge (M) located on the hydraulic oil reservoir. If the gauge
indicates a pressure of 0.8 bar, change the filter. This should be done by
qualified personnel.
Figure 4.10: Hydraulic Oil Return Filter
4.6. WHEELS AND PNEUMATICS
If the tires are under inflated, this can damage the internal structure and
cause premature deterioration.
If they are over inflated, this can cause the wheels bounce on hard ground
causing directional loss and uneven wear.
Check tire pressure weekly to assure that is
the same as that
indicated in the following table, in addition the pneumatics mounted on the
mixer and the tyre pressure are as those in accordance with the machine.
Weekly, inspect the pneumatic hoses to check for objects
embedded in their tread or between double bogie wheels for the
presence of cuts or cracks on their sides.
One auger vertical
Model Denomination
Pressure
(Bar)
EMV-8 / EMV-8P
EMV-10 / EMV-10P
EMV-12 / EMV-12P
EMV-14 / EMV-14P
EMV-17 / EMV-17P
8.15.15 9
R
M
DUPLO
Model Single
Pressure
(Bar)
Twins
Pressure
(Bar)
R
EMV-14.5B
EMV-16B
8.15.15 9
EMV-18B
EMV-20B
EMV-22B
445/45-19.5 5.5
8.25.15 9.5
EMV-24B - - - -
EMV-26B - - - -
Model Tandem
Pressure
(Bar)
Bogie
Pressure
(Bar)
EMV-14.5B - - - -
EMV-16B - - - -
EMV-18B
EMV-20B
EMV-22B
EMV-24B
EMV-26B
445/45-19.5 5.5 445/45-19.5 5.5
Table 4.4: Pneumatics
Note: If the machine is going to be parked for a long period of time, it is
recommended to over inflate the tires to 0.3 bar above the values indicated in
the previous tables.
A tire in bad shape can blow out and cause the mixer to lose
control and drag the tractor that is towing it. Tires should be
changed in a specialized shop.