manualshive.com logo in svg

TATA Motors SUMO GRANDE, Руководство владельца и сервисная книжка

Поделиться
Скачать
TATA Motors SUMO GRANDE Скачать руководство пользователя страница 97

9797

OPENING & CLOSING THE BONNET

Maintenance

Opening & Closing the Bonnet
Opening:

1. Ensure that the vehicle is in
neutral gear with the parking brake
applied.
2. Pull the bonnet release lever
located under the right hand corner
of the dash board. The bonnet will
pop up slightly.
3. Raise the bonnet slightly and
with your finger lift the secondary
lock lever located under the bonnet
centre.
4. Lift the bonnet up. Pull the
bonnet stay rod from its clip and
insert the free end into the slot in
the bonnet, slide stay rod outward
to secure.

Closing :

1. To close the bonnet disengage
the stay rod & clamp it properly.
2. Lower the bonnet and drop it
from a short height to shut.

CAUTION

Bonnet release Lever

Location of Bonnet release lever

Ensure that the bonnet is
properly locked before driving.
Do not press the bonnet onto
the bonnet lock.

Bonnet opening secondary

lock lever

Ofrecido por www.electromanuales.com

Содержание SUMO GRANDE



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды