manualshive.com logo in svg

TATA Motors SUMO GRANDE, Руководство владельца и сервисная книжка

Поделиться
Скачать
TATA Motors SUMO GRANDE Скачать руководство пользователя страница 55

5555

Opening the doors from inside :

All doors can be opened from
inside. To open pull the door
opening lever / latch (2).

Childproof lock 

:

Both the rear doors of the vehicle
are provided with child proof lock.
Push the lock lever located on
vertical face near the lock
downward before closing the door.
The door which has been locked
cannot be opened from inside, it
can be opened only from the
outside.

Tail gate Locking / Unlocking :

Insert the key and turn it anti-
clockwise to open or clockwise to
lock the door. Pull the Door handle
to open an unlocked door and just
by closing the tail gate to its original
position, it gets locked

.

DOOR LOCK & CHILD LOCK

Getting Started

Location of door opening lever/
latch

Tail gate Swing Handle

CAUTION

Deactivate the childproof lock
when not required.

Ofrecido por www.electromanuales.com

Содержание SUMO GRANDE



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды