manualshive.com logo in svg

TATA Motors SUMO GRANDE, Руководство владельца и сервисная книжка

Поделиться
Скачать
TATA Motors SUMO GRANDE Скачать руководство пользователя страница 64

64

Driving

SAFETY CHECKS

Before Driving, please ensure to
check (Refer maintenance)

1. Tyre pressure and condition of

tyres. Inflate recommended tyre
pressure if required.

2. Coolant level to Max level.

3. Engine oil level up to Max mark

on dipstick.

4. Brake fluid level .
5. Water in windshield washer

reservoir. Top up if required.

6. Power steering oil level.

7. Battery electrolyte level.
8. Fuel level. Ensure sufficient

Fuel.

Adjust

1. Check position of seat. If

required adjust to your
convenience.

2. Check adjustment of all rear

view mirrors.

Ensure

1. Bonnet is fully closed.
2. All doors are properly closed &

locked.

3. Check that any items you may

be carrying inside with you are
stored properly or fastened
down securely.

4. Seat belts are fastened
5. Ensure all mirrors, windows and

outside lights are clean and
unobstructed. Remove dust,
frost, snow or ice if any, on
these.

6. All switches & lamps are working

7. Check and ensure that all the

gauges and indicators in the
instrument cluster are working.

8. Gear shift lever is in neutral

position

9. Parking brake is released.
10.Adjust steering wheel position.

SAFETY CHECKS
Windshield/wiper/windshield
washer

Always keep windshield glass clean
to avoid any distraction in visibility.
Ensure proper working of wipers
and condition of wiper blade.
Ensure that windshield washer
reservoir is full. Do not operate
wiper alone when the windshield
glass is dry, this would damage the
windshield.

Headlights

Keep headlight lenses clean. Check
for operation of headlamps in both
high/low beam condition. Check for
correct focusing of headlamps. Use
only recommended type of bulbs.
Do not use the high beam unless it
is inevitable. Its dazzle may glare
the driver of the oncoming car the
condition thus causing an accident.

Ofrecido por www.electromanuales.com

Содержание SUMO GRANDE



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды