manualshive.com logo in svg

TATA Motors SUMO GRANDE, Руководство владельца и сервисная книжка

Поделиться
Скачать
TATA Motors SUMO GRANDE Скачать руководство пользователя страница 50

50

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Anti Theft/ Immobiliser cum Keyless Entry System (If fitted)

EMERGENCY DISARMING
PROCEDURE :

THIS PROCEDURE IS
APPLICABLE IN CASE OF LOST
REMOTE & SYSTEM IN ARMED /
AUTO ARMED / IMMOBILISED
STATE I.E. CLUSTER LED IS
BLINKING

1.

Enter the vehicle by opening
the door through physical key
& close the door.In case the
vehicle is in armed condition,
the system will enter armed
panic in immobilised state-will
hoot (if provided) and flash for
max. 27 seconds.

2.

Open driver door or turn on haz
ard switch.

3.

Turn ignition ‘ON’ and ‘OFF’ 3
times within 5 seconds.

4.

On successful completion of
step 3, the sysytem will come
out of the immobilised state to
enter emergency dis-arming

state. (This state is similar to
the immobilised state without
the hooting and side indicator
flashing).The left and right
indicators will remain ON for 5
sec. and will go OFF after that.

5.

If step 3 is not completed within
5 seconds the system will
remain in immobilised state
and the left & right indicators
will not come ON as in point
no.4. Close the driver’s door
and follow the step no. 2
onwards

6.

After step 5 the left and right
indicators start flashing (ON/
OFF) for max. 9 counts the
user. Must count  the number
of flashes and turn ignition ‘ON’
as soon as this count matches
the first digit of secret code.
The left and right indicators  will
stop flashing.

7.

Switch ‘OFF’ the ignition.

8.

The user must enter the 2

nd

,

3

rd

 and 4

th

 digit of the secret

code in a similar fashion as
described in step 6 & 7 above.

9.

After successful entry of all the
four digits of secret codes the
cluster left and right indicators
stops flashing. The system will
dis-armed and vehicle will get
mobilised.

10.

 Close driver door or turn ‘OFF’

hazard switch.

11.

 In case of any error in

entering the secret code digits
the left and right indicators
continue to flash and the
system remains in immobilsed
state to re-enter secret code.
Perform step 10 and start the
procedure from step2 onwards.

12

. All previously learned remotes

will get unlearnt.

13.

 vehicle engine is released for

5 cranks (configurable) only.

Ofrecido por www.electromanuales.com

Содержание SUMO GRANDE



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды