manualshive.com logo in svg

TATA Motors SUMO GRANDE, Руководство владельца и сервисная книжка

Поделиться
Скачать
TATA Motors SUMO GRANDE Скачать руководство пользователя страница 52

52

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Anti Theft/ Immobiliser cum Keyless Entry System (If fitted)

8.

The user must enter the 2nd,
3rd and 4th digit of secret code
in similar fashion as described
in step 6,7 and 8 above.

9.

After successful entry of all the
4 digits of existing secret code,
the left and right indicators
stops flashing for 10 sec.

10.

If a wrong secret code is
entered, the LED continues to
flash and the system remains
in immobilised state. To re-
enter secret code, switch OFF
the parking lights and start
procedure from step 2 on-
wards.

11.

Repeat steps 7, 8 and 9 but
with the new 4 digit number.
The digits to be entered can be
from 1 to 9. After successful
entry of all 4 digits of new
secret codes the left and right
indicators stops flashing for 10
sec.

12

. Again repeat the steps 7,8 and

9 with the same new 4 digit
number. After successful
entry of all the 4 digits of new
secret code, the left and right
indicators stops flashing for 10
sec.

13.

If the new secret code entered
twice is not matching then the
flashing of side indicators will
start for 5 sec. To restart the
procedure of entering new
code, steps from 12 onwards
to be performed. The left and
right indicators starts flashing
after 10 sec.

14.

If secret code entered twice is
matching then the system gives
information of newly entered
code with  the equivalent
number of left and right
indicators  flashes for each
digit, with a 5 sec. gap between
two digits.

15.

Switch OFF the parking lights.

16.

The newly entered secret
number to be used here after
emergency dis-arming and
remote learning.

NOTE : No remote will get unlearnt
with this  procedure.

During this procedure any key
pressed from the remote will be
ignored.

REPLACEMENT OF REMOTE
BATTERY :

(replace every year for normal use)

1.

Place the remote button-side
facing down and remove
screws.

2.

Change the battery with
GOLDEN POWER Battery GP
23A or equivalent (eg:- Duracell
MS21/ MN21).

3.

Put back the screws.

4.

Press any button and check
that the LED on the remote
glows.

Ofrecido por www.electromanuales.com

Содержание SUMO GRANDE



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды