TATA Motors nano genX, Руководство пользователя

Страница: 87 / 156

85 85
IN CASE OF EMERGENCY
TOWING THE VEHICLE
Connect Leads In The Order As
Shown In Sketch.
Following order should be
followed while connecting battery
leads :
1. Positive (+) of Good battery to
Positive (+) of discharged
battery.
2. Negative (-) of Good battery to -
a solid metal patch attached to
engine block OR unpainted
metal (Engine) part which is
away from the discharged
battery.
3. Crank and start the engine.
4. While disconnecting follow
reverse order i.e. disconnect
Negative (-) lead followed by
Positive (+) lead.
Towing the Vehicle :
Securing the towing hook at front:
•
Provision for fitment of towing
hook is provided on front
bumper as indicated.
NOTE
Do not connect negative (-)
terminal of jump start battery
(Good battery) to the negative ( - )
terminal of discharged battery.
This may lead to an explosion.
Tow Hook Location at Front
Towing Hook fitment & Removal:
•
Take the towing hook and the
wheel spanner from the vehicle
tool kit.
•
Screw and tighten the towing
hook clockwise.
•
To remove towing hook, unscrew
it anti-clockwise.
•
Fit the tow hook cover in its
place.
•
Place the towing hook and wheel
spanner back in the vehicle tool
kit.
Transporting the vehicle :
The towing hooks can be used to
pull the vehicle onto a trailer or
transporter for transporting
purposes.
To secure, only lash the vehicle
down by the wheels or tyres. Your
vehicle could otherwise be
damaged,