67
Cleaning the water distributor
Cleaning the machine
Storing / parking the machine (not in operation)
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec
-
cable operation and a long service life.
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal
-
functions.
The required data are provided on the nameplate of your ma
-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Notice:
Clean the brush whenever cleaning work
is completed.
• Place the machine on the parking
support.
• Remove the recovery tank from the
machine.
• Remove the hoses from the lid of the
water distributor.
• Remove the lid (1) and the water dis
-
tributor (2).
• Clean the lid (1) and the water distrib
-
utor (2) under running water.
Attention:
Never clean the machine with a high-pres
-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Notice:
The machine must be switched off (main
switch).
• Store the machine on the parking
support with the tank lid open. This
enables the tank to dry,
and the generation of mold and un
-
pleasant odors is prevented.
Attention:
Never store the machine with discharged
batteries. Otherwise, the batteries will be
damaged beyond repair.
X
1
2
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex
-
pire.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
◊
◊◊
◊◊◊
⊗
Page
Draining and cleaning the recovery and
fresh water tank (Flextank)
●
Check the suction filter for contamina
-
tion and clean it
●
Clean all yellow marked parts
●
Clean the brushes
●
Clean the squeegee, check the blades
for wear and change them, if necessary ●
Wipe the machine using a damp cloth
●
Clean the seals of the tank lid, check
them for cracks and replace them, if
necessary
●
• In order to maintain operational safe
-
ty and readiness for use, the ma
-
chine must be serviced whenever the
maintenance indicator lights up (fac
-
tory setting is 250 working hours) or
at least once a year.
Notice:
In case of extraordinary use and/or insuffi
-
cient maintenance, shorter intervals are
required.
EN