Tascam X-48MKII Скачать руководство пользователя страница 38

Страница: 38 / 60

TASCAM X-48MKII

29.97 drop (29.97 Drop)

•

is the standard for broadcast

television post production in the U.S.

25-frame non-drop (25 NDF)

•

is the standard in Europe

24-frame non-drop (24 NDF)

•

is sometimes used for

HDTV production or film location recording

24.975 non-drop (24.975 NDF)

•

is 25-frame pull-

down, used to play 25-frame videos on American NTSC

monitors

23.976 non-drop (23.976 NDF)

•

is “HD pull-down,”

used to play down-converted HD videos on American

NTSC monitors

To change the frame rate:

Mouse/Keyboard Operation

1 Click the

Windows

menu and select the

Settings

window.

2 Click on the

Sync

tab and click the

Frame Rate

submenu. Choose your desired frame rate from the

list.

Front Panel Operation

• Press the SYNC button. Press the

buttons to

select

Frame Rate

and press CHNG.

• Select a frame rate from the list using the

buttons and press Enter.

Control Mode

Four control modes are available:

Internal

Internal is the default setting, the X-48MKII controls its

own transport and ignores the SMPTE timecode input.

SMPTE

SMPTE follows the SMPTE timecode input for location,

from the TIME CODE input on the rear panel.

MIDI (MTC)

MIDI (MTC) looks to the MIDI input for timecode.

Theater Play

Theater Play plays a section of the timeline, stops, and

waits for a Play command to play the next section.

Theater Play mode overview

Using the Theater Play mode, you can play back cues one

after another. This function is useful for triggering the

playback of musical cues and effects during theater and

radio performances, for example.
To activate this mode, use a mouse and keyboard or the

front panel of the unit to set the control mode to Theater

Play.
In this mode, you can playback and locate to cues.

Each cue contains two items of time data: the start point

and the stop point.
Cue number 1 starts at the time set for marker #0 and

stops at the time set for marker #1. Cue number 2 starts

at marker #2 and stops at marker #3. Cue number 3 uses

markers #4 and #5, and so on.
Before enabling Theater Play mode, a cue must be set

within the project.
The total number of markers in a project must be even

(e.g. #00–#07). If the total number of markers in a project

is odd, the transport will not locate to the final marker.
In this mode, press the PLAY button to start playback from

the beginning of the first cue (marker #0). Playback will

continue until the end of the cue (marker #1) and then

the transport will locate to the beginning of the next cue

(marker #2) and stop. When the unit is instructed to play

again, it will play this cue.
If you connect a footswitch to the

FOOT SWITCH

jack

on the rear panel of the unit, you can trigger playback by

pressing the footswitch. In other words, the footswitch

functions as the PLAY button in theater mode.

Theater Play mode operation

When the control mode is set to Theater Play, pressing

•

the FF or REW button will locate to the playback start

marker of the previous or next cue and standby.
During playback of a cue, press the STOP button to

•

stop playback at that point. Press the PLAY button

again to locate to the starting marker of that cue and

start playback again.
Recording is not possible when the control mode is set

•

to Theater Play.
The second line of the front panel display shows the

•

current cue number and the marker numbers assigned

to that cue when the control mode is set to Theater

Play.
During Theater Play, you can press the

•

REH

button to

enable rehearsal mode, allowing playback from the

middle of a cue.
Click the

Markers

item in the

Windows

menu to open the

MARKERS

screen. On the

MARKERS

screen, you can locate

to the cue you want, and play it back. In addition, you

can click the

Theatre Playlist

in the

Windows

menu to

open the

THEATER PLAYLIST

screen. On the

THEATER

PLAYLIST

screen, you can reorder cues as you like.

Put a check next to

Enable Theatre Playlist

to play back

cues in the

THEATER PLAYLIST

order.

To change the control mode:

Mouse/Keyboard Operation

1 Click the

Windows

menu and select the

Settings

window.

5 – Recorder

Содержание X-48MKII





























































Результаты поиска

Содержание X-48MKII

Отзывы:

Бренды по названию

Популярные бренды

Tascam X-48MKII, Руководство пользователя

Результаты поиска

Содержание X-48MKII

Отзывы:

Бренды по названию

Популярные бренды