46
Only notes that are within 350ms of the earliest note in the selection are played back in this manner,
and a maximum of 8 will be played. This allows smart auditioning of chords.
2.
There is now a Tap Tempo feature
After numerous requests from users, a Tap Tempo feature was added.
To see how this works, navigate to the Time Tempo screen.
You can use the Tap Tempo soft button to the bottom right, or you can use the ENTER key in the
surface keypad. The SX-1 averages out the values between three presses, and posts the value in the
tempo area.
Tap the ENTER button three times. You should see a new tempo posted in the tempo field.
The button just above the Tap Tempo button on the LCD is labeled TAP SETS TEMPO. With this
option selected, the tapped tempo automatically updates the project tempo. To try it, watch the tempo
readout on the Track screen while tapping the ENTER key. You will see it update to the new tapped
tempo automatically.
3.
The order of the Nudge and Grid registers on the LCD has been changed
The order of the Nudge and Grid registers on the LCD screen was changed to match the VGA screen.
It was a tad confusing for some users. Like the VGA screen, the top register now shows the Nudge
value, while the bottom register now shows the Grid value. Now you ll always know.
4.
The sorting of takes has changed on the LCD Track screen
On the LCD Track screen, the 4
th
soft knob calls up the take browser. In version 1.0, the takes were
sorted alphabetically.
