40
After a pass like this (where there is an extreme amount of gain), you will likely see an error log
message indicating that some clipping may have occurred:
It is not recommended that you press PLAY and listen to this until after you have chosen undo
, to
return your audio to its previous state. Distortion is sure to ensue if you fail to undo your Level action.
17.
Offline audio Edit Operations now support dB values
Some users found the sliders difficult to use on a number of Edit Ops, even while right-clicking (for
fine tuning). These Ops now support text entry of dB (decibel) values. The Ops and their possible
ranges are:
1. Gain/Fade —
values from -100 dB to +40db.
2. Level FX —
values from -20dB to +20dB.
3. Normalize —
values from -20dB to 00 dB.
18.
Audio events can now be muted via a key command
Selected audio events can be muted on the VGA Track screen by pressing Alt+Shift+M. This
functionality was previously available from either the Event Editor or the Mute Event edit op, but the
addition of a key command should help speed up usage.
19.
Clarification: what is loaded when Import Setup is chosen from the project template menu?
Solo Mode
User Defined Solo Type
Automation On/Off
Automation Initial Event Ramp Time
Automation Control Sense Timeout Time/ Enabled
Automation Write Revert Time/ Enabled
Automation Trim Revert Time/ Enabled
Automation Auto Fade Time
Global Automation Mode
Automation Trim All
Automation Multi-pass
Automation event density
Library Recall transition time
Usernames for Group masters
Currently Selected Channel
Selection Mode
User Bank Settings
Virtual Channel button On/Off
Cue Mode button On/Off
In/Out/Sync Registers
Last play head location
Slate Setup.
Loop Play mode
Preroll, postroll times.
Machine Control List contents.
Jump Key settings,
Auto Play Mode,
Cueing Mode
Nudge Settings
