36
TASCAM SS-R1/SS-R05
Using the sampling rate converter
The SS-R1/SS-R05 contains a built-in sampling rate
converter, allowing you to record at a sampling rate that is
different than the sampling rate of the digital input source.
Use the menu to turn the sampling rate converter (SRC) on/
off (for details on menu operations, refer to “Operations in
the menu screens” on page 16).
1 Press the
MENU
key to access the main menu list
screen.
2 Open the REC menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚
key (or the remote’s
cursor
¥
key) to proceed to the REC PREFERENCE
screen.
5 Select the SRC item.
6 Turn the
MULTI JOG
dial (or use the remote’s
cursor
§
,
¶
keys) to turn the SRC setting
ON
/
OFF
.
7 When you’ve finished making the setting, press the
front panel
TIME (ESC)
key (or the remote’s
CLR/
ESC
key) to return to the home screen.
NOTE
If a digital signal whose sampling rate differs from
•
the sampling rate specified in the REC FORMAT item
is being received at the DIGITAL IN jack, and you
attempt to record with SRC off, an error message (
FS
UNMATCH
) will appear.
The sampling rate setting is remembered even when
•
the power is turned off.
Monitoring the input signal
When you press the
RECORD
key to enter the record-
ready condition, the front panel
RECORD
key and
READY
key will light, and the input signal will be output from the
SS-R1/SS-R05’s various output jacks (headphone, analog
balanced, analog unbalanced, and digital). The meter in the
home screen will indicate the input level.
READY key
RECORD key
STOP key
To cancel the record-ready condition, press the
STOP
key.
TIP
If you simply want to monitor the input signal without
•
intending to record anything, press the
RECORD
key
without a CompactFlash card inserted. The display will
indicate
MONITOR
, and the
RECORD
key will blink
red.
To stop monitoring the input signal, press the
•
STOP
key.
6 − Recording
