32
TASCAM SS-R1/SS-R05
Flash Start function
The Flash Start function lets you instantly start playback of
a track you’ve registered.
The beginning of up to twenty tracks can be pre-loaded
into memory, so that playback can be triggered instantly
from a PS/2 keyboard connected to the front panel, or
from an external device connected to the SS-R1’s parallel
connector.
1 Specify the play area (see “Play area” on page 21).
Specify the play area as the play list or folder that
contains the tracks you want to flash-start. Make sure
that there are no more than twenty tracks.
2 Set the play mode to CONTINUE or PROGRAM (see
NOTE
You can’t use Flash Load if the play mode is set to
RANDOM.
3 While stopped, press the remote’s
FLASH LOAD
key.
The SS-R1/SS-R05 will successively read the
beginning of each track in the play area.
The tracks will be read in the order of playback. In
other words if the play mode is CONTINUE, the tracks
will be read consecutively, starting with the first. If the
play mode is PROGRAM, the tracks will be read in the
order of the program.
While the tracks are being read, the lower right of the
home screen will indicate
FLASH
blinking.
NOTE
If you press the
•
FLASH LOAD
key when the play mode
is RANDOM, the display will indicate
CAN
,
T SELECT
,
and the data will not be loaded.
If you press the
•
FLASH LOAD
key when the play
mode is SINGLE, the tracks in the play area will be
read successively in the same way as for the CONTINUE
setting.
If twenty-one or more tracks are registered, data for
•
the first twenty tracks from the beginning will be
loaded.
When the data has been loaded, the lower right of the home
screen will indicate
FLASH
.
Resume Playback
If the Resume Playback mode is on, playback will begin
from the location at which playback was last stopped (the
“resume point”).
The Resume point will be erased when you perform the
following operations.
Remove the CompactFlash card.
•
Switch the play area.
•
Switch the play mode.
•
Change the contents of the CompactFlash card (by
•
recording, editing, deleting, etc.).
Use the menu to turn the Resume function on/off (for
details on menu operations, refer to “Operations in the
menu screens” on page 16).
1 Press the
MENU
key to access the main menu list
screen.
2 Open the PLAY menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚
key (or the remote’s cursor
¥
key) to proceed to the PLAY PREFERENCE
screen.
5 Select the RESUME item.
6 Turn the
MULTI JOG
dial (or use the remote’s cursor
§
,
¶
keys) to turn the setting
ON
/
OFF
.
7 When you’ve finished making settings, press the
front panel
TIME (ESC)
key (or the remote’s
CLR/
ESC
key) to return to the home screen.
NOTE
This setting is remembered even when the power is
•
turned off.
If no playable track exists (e.g., if not even one track
•
has been registered in program mode), of cause, the
resume point cannot be made. The counter display
will state
000tr 00h 00m 00s
.
If the resume point does not exist (i.e., if the time
•
registered as the resume point does not exist), the
beginning of the first track in the play area will be the
resume point.
This is an example of a screen from an SS-R1 unit. The
•
SS-R05 menu does not show the “3. EOM TRACK and 4.
EOM MEDIA items.”
5 − Playback
