Tascam HS-2000 Скачать руководство пользователя страница 24

Страница: 24 / 156

TASCAM HS-2000

3 − Preparations

Inserting and removing CF cards

Inserting CF cards

Insert a CF card into a CF card slot on the front of the unit

in order to use it for recording and playback.

NOTE

CF cards can be inserted whether the power is ON or OFF.

1. Pull the CF card slot cover forward to open it.

2. Insert the CF card with the correct orientation. With

the labeled side up, insert the end with the connector

completely.

3. Close the cover.

NOTE

If you cannot close the slot cover, remove the CF card

once, press the square button to the right of the slot and

then reinsert the card.

Removing CF cards

Turn the unit power OFF or stop operations before

removing a CF card.

CAUTION

Never remove a CF card during recording, playback or any

other operation that accesses the CF card. Doing so could,

for example, cause recording errors, loss of recorded data,

and sudden loud noises to be output through monitoring

equipment, which could result in damaged equipment

and hearing loss.

1. Pull the CF card slot cover forward to open it.
2. Press the square button to the right of the CF card slot

to bring the button out.

3. Press the square button in again to partially eject the

CF card.

4. Pull the CF card out by hand.

Содержание HS-2000





























































































































































Результаты поиска

Содержание HS-2000

Отзывы:

Похожие инструкции для HS-2000

Бренды по названию

Популярные бренды

Tascam HS-2000, Руководство пользователя

Результаты поиска

Содержание HS-2000

Отзывы:

Похожие инструкции для HS-2000

Бренды по названию

Популярные бренды