42
TASCAM GT-R1
7–Recording
Under the file size value, the maximum
recording time for the selected size, format
and sample rate appears.
NOTE
For the same file size, the possible recording
time differs depending on the file type selected.
Furthermore, if the recording time is 24 hours or
more, this will be displayed as 23:59:59.
Selecting the input source
Follow these procedures to select the input source.
1 Press the
SETTING
key to open the Input
Setting Screen.
2 Use the
INPUT
item to select one of the
following input sources.
INT/MIC
Sets the input source as the built-in microphone
when no microphone cable is connected to the
MIC
IN
jack (stereo mini-jack). When a microphone
cable is connected to the
MIC IN
jack, the input
microphone signal becomes the input source.
If you select
INT/MIC
, you should also set the
input functions. (See “Setting the INT/MIC IN
input functions” below.)
GUITAR
Sets the input source as the guitar or bass signal
input through the
GUITAR IN
jack (standard mono
phone jack) on the front panel. Left and right
channels are combined into the same signal.
LINE
Sets the source as the line level signal (–10 dBV)
input to the rear panel
LINE IN
jack (stereo
mini-jack).
