12
TASCAM GT-R1
Setting the date and time
Follow these procedures to set the date and time
of the built-in clock. When you create an audio
file, date and time information is included in the
file data.
1 Press the
MENU
key to open the Menu
Screen.
2 Use the wheel to select
DATE/TIME
and press the
¥/π
key to open the
Date/Time Screen.
The clock stops while this screen is displayed.
3 Use the
µ
and
≤
keys to move the cursor
(the part highlighted in inverse)
and use the wheel to set the values.
4 After making the setting, press the
¥/π
key
to restart the clock from the newly set value.
The display returns to the Menu Screen.
Resetting the unit
The back panel of the unit has a reset hole.
If the unit is operating abnormally, push the end of
a paperclip, fine pin or similar item into this hole to
press a button inside the unit. This turns the power
OFF and resets the GT-R1’s system.
CAUTION
Do not press the reset button when the unit is
functioning properly.
2–Preparation
