4
TASCAM DR-44WL
Model for EEA (European Economic
Area)
Hereby, TEAC Corporation
declares that the radio
equipment type is in
compliance with Directive
2014/53/EU., and the other
Directives, and Commission
Regulations.
CAUTION
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user’s authority to operate the equipment.
CAUTION
Authorization of wireless devices are different in
countries or regions. Please use only in the country
where you purchased the product.
• Depending on the country, restrictions on the use
of Wi-Fi wireless technology might exist.
Confirm the laws and regulations of the country or
region where you want to use the unit before use.
Radiation Exposure require-
ments
This equipment meets the regulation, which is
recognized internationally, for the case of human
exposure to radio waves generated by the trans-
mitter.
Based on the following two conditions:
• End-users and installers must be provided with
antenna installation instructions and transmitter
operating conditions for satisfying RF exposure
compliance.
• This equipment should be installed and operated
with minimum distance 20 cm (8”) between the
radiator and your body.
8
Statement of compliance
Model for USA
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
Exposure Guidelines.
Model for Canada
This equipment complies with IC RSS-102 radiation
exposure limits set forth for an uncontrolled
environment.
EEA (European Economic Area) model
This equipment complies with EN.62311; Assessment
of electronic and electrical equipment related to
human exposure restrictions for electromagnetic
fields; the harmonised standard of DIRECTIVE
2014/53/EU.
Information for interference
(FCC requirements)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures.
• Reorient or relocate the equipment and/or the
receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Declaration of Conformity
Model Number :
DR-44WL
Trade Name :
TASCAM
Responsible party : TEAC AMERICA, INC.
Address :
10410 Pioneer Blvd. Suite
#1 and #4, Santa Fe Springs,
California 90670, U.S.A.
Telephone number : 1-323-726-0303
This device complies with Part.15 of FCC Rules.
Operation is subject to the following two
conditions:
1) This device may not cause interference, and
2) This device must accept any interference,
including interference that may cause
undesired operation.
Introduction
Thank you very much for purchasing the TASCAM
DR-44WL Linear PCM Recorder.
Before connecting and using this unit, please take
time to read this manual thoroughly to ensure you
understand how to properly set it up and connect
it, as well as the operation of its many useful and
convenient functions. After you have finished
reading this manual, please keep it in a safe place for
future reference.
Note about the Reference
Manual
This Owner’s Manual explains the main functions
of this unit. Please see the Reference Manual for
information about all the unit’s functions.
You can also download this Owner’s Manual and the
Reference Manual from the TEAC Global Site (http://
teac-global.com/).
This product has a Blackfin® 16/32-bit embedded
processor made by Analog Devices, Inc. This
processor controls digital signal processing.
Inclusion of this Blackfin® processor in the product
increases its performance and reduces its power
consumption.
Items included with this product
This product includes the following items.
Take care when opening the package to avoid
damaging the items. Keep the packing materials for
transportation in the future.
Please contact the store where you purchased this
unit if any of these items are missing or have been
damaged during transportation.
• Main unit ............................................................................... × 1
• AC adapter (GPE053B) .................................................. × 1
• microSD card with adapter (in the unit)............ × 1
• USB cable (80 cm) ........................................................... × 1
• AA alkaline batteries ...................................................... × 4
• Fur windscreen .................................................................. × 1
• Grip ........................................................................................... × 1
• Shoe mount adapter ..................................................... × 1
• Soft case ................................................................................ × 1
• Owner’s Manual (this document)
including warranty ......................................................... × 1
Contents
Compliance of radio transmitter and interference .. 3
Radiation Exposure requirements .................................4
Information for interference (FCC requirements) ...4
Items included with this product .................................4
About TASCAM customer support service ..............5
Preparing the power supply ..............................................6
Starting up the unit .................................................................7
Selecting the language ........................................................7
If you accidentally select the wrong language .....7
Setting the built-in clock .....................................................7
Shutting down ...........................................................................7
Connecting monitoring devices and
headphones .................................................................................7
Basic menu operation procedures .............................7
Menu structure...........................................................................7
Recording .............................................................................8
Recording Screen .....................................................................8
Adjusting the input level .....................................................8
Set the low-cut filter ...............................................................8
Using the level control function .....................................8
Record ..............................................................................................9
About the recording standby state ..............................9
Recording menu structure .................................................9
Playback ................................................................................9
Playing back recordings .......................................................9
Selecting the playback file (skipping) .......................9
Adjusting the playback volume ......................................9
Connecting with a Computer .......................................9
Settings and Information Display ...............................9
Connecting the unit to a smartphone via Wi-Fi...10
How to obtain and install the dedicated
(smartphones, tablets and computers) by Wi-Fi
(TO DEVICE mode) ................................................................10
Connecting the unit to external devices
(smartphones, tablets and computers) by Wi-Fi
(VIA ROUTER mode) ..............................................................11
Remote control of the unit from a smartphone 12
Transferring files from the unit to a computer ... 12
Quick Reference for Using Various Functions ......13
Messages .............................................................................14
Troubleshooting ..............................................................14
Specifications ....................................................................15