TASCAM DR-40
7
1 – Introduction
• Automatic level control is available to increase or decrease
the recording volume when the input sound is too low or
too high, respectively.
• Limiter function automatically reduces the level suitably in
particular portions where the input level is too high
• Low cut filter conveniently reduces low-frequency noise
• VSA function can change the playback speed in the range
from 0.5 to 1.5 times (in 0.1 increments) the normal speed
without changing pitch
• Repeat playback and IN-OUT loop playback functions
• PB CONT button is available to show settings screens for
playback speed control and IN-OUT loop
• Tuner function to tune musical instruments
• Self-timer function to start recording after a set period of
time.
• Jump back and play function allows the last several seconds
of the currently played file to be replayed again by simply
pressing a button
• Delay compensation function that eliminates time lags
caused by differences in the distances of two sets of inputs
from the sound source
• Playlist function
• DIVIDE function allows files to be split where desired (only
for WAV files)
• MARK function convenient for moving to specific locations
• Equalizers function for playback, and level alignment
function to enhance the perceived overall sound pressure
• File name format can be set to use a user-defined word or
the date
• Resume function to memorize the playback position before
the unit is turned off.
• 3.5 mm (1/8”) line/headphones output jack
• 128 x 64 pixel LCD with backlight
• Mini-B type USB 2.0 port
• Operates on 3 AA batteries, an AC adaptor (sold separately:
TASCAM PS-P520E), or USB bus power
• Tripod attachment screw-hole built into unit
• USB cable included
• Mic inputs can p24V/+48V phantom power
• Two balanced mic/line inputs (XLR/TRS combo jacks)
