12
TASCAM DR-40
2 – Names and Functions of Parts
• Recording standby: level control, swap left and right
built-in mics
•
MIXER
screen: MS DECODER setting
When the
BROWSE
screen or
PLAYLIST
screen is displayed,
press this button to show or cancel the popup menu for
file/folder operations.
o
/
button
Press this button during playback or when playback is
stopped to skip to the beginning of the next file. When the
IN and OUT points are set between the current position
and the end of the file, pressing this button skips to those
points.
Press and hold this button to search forward.
On the setting screens, use this button to move the cursor
right.
Press this button while pressing and holding the ENTER/
MARK button to move to the next mark.
On the
BROWSE
Screen, press this button to move down
a level. If a file is selected, the file is loaded and the unit
returns to the Home Screen and stops.
p
ENTER/MARK button
Use this to confirm the selection of a setting item or to
answer “YES” to a confirmation message.
When recording, use it to add markers manually.
Press the
.
or
/
button while pressing and holding
this button to move to the previous or next mark,
respectively.
When the Playback Control screen is open, use this button
to set the IN (start) and OUT (end) points of the interval
that you want to set for loop playback. When the IN and
OUT points are already set, press this button to cancel
loop playback and clear the IN and OUT points.
a
MIXER button
Press this button to open the
MIXER
screen.
When the
MIXER
screen is open, press this button to return
to the Home Screen.