TASCAM DR-10L Pro V1.00
29
8 - Menu item list
Press the MENU button to open the Menu Screen. This list provides an overview of the various menu items.
Menu item
Setting items (default
value underlined) or
display content
Explanation
While
record-
ing
(remote
opera-
tion)
01: REC LEVEL
HIGH / HIGH-MID / MID /
MID-LOW / LOW
Use to set the audio signal level recorded in recording files.
02: LOW CUT
OFF / 40Hz / 80Hz / 120Hz
/ 220Hz
Turn the mic input low-cut filter function on or off.
03: LIMITER
OFF / ON
Turn the limiter function on or off.
04: AUTO LEVEL
OFF / ON
Turn the auto level function on or off.
05: PHASE
DEFAULT / INVERT
Use to set the phase according to the type of mic connected.
06: FILE FORMAT
WAV / MP3H / MP3L
Use to set the recording file format
07: FILE TYPE
MONO / POLY
Use to set the type of file used for WAV recording.
08: REC FORMAT
44.1kHz / 48kHz
Use to set the sampling frequency setting.
09: BIT DEPTH
16bit / 24bit / 32-bit float
Use to set the quantization bit depth.
10: TIME MARK
OFF / 5min / 10min /
15min / 30min / 60min
Use to turn the time mark function on or off.
11: PEAK MARK
OFF / ON
Use to turn the peak mark function on or off.
12: FILE NAME
TEXT / DATE / UNIT NAME
Use to set the format of names given to files recorded by this unit.
13: TEXT
[DR0000]
Use to set the characters added to file names when recording.
14: UNIT NAME
Not Available
This shows the individual name set for the unit. If the UNIT NAME has not been set,
“Not Available” will be shown.
15: POWER SAVE
OFF / ON
Use to turn on/off the automatic power saving function when using batteries.
16: FILE NUMBER
[0001] or Not Available
The file number that will be used the next time a file is created can be set. “Not
Available” will be shown if the METADATA function has been turned on using the
dedicated control app.
17: BACKLIGHT
ALWAYS / 5sec / 30sec
This setting controls the brightness of the display backlight.
18: FORMAT SD
QUICK / ERASE
Use this to format the microSD card in the unit.
19: BATTERY
ALKALINE / Ni-MH /
LITHIUM
Use this to set the type of battery used.
20: DATE/TIME
YY-MM-DD hh:mm
Use this to set the unit’s internal clock.
21: SYSTEM INIT
Sure? NO / YES
Use this to restore the various settings of this unit to their default values.
22: VER INFO
V-.-- B---
This is the firmware version used by the unit.
23: AK-BT1 VER
*.*.*-*** or Not Available
This is the software version used by the AK-BT1 installed in the unit. “Not Available”
will be shown if none has been installed.
24: CARD READER
—
Use this to switch the USB connection mode of the unit to USB mass storage mode.
25: BLUETOOTH
OFF / REMOTE / TIMECODE
Use this to switch between remote control and timecode functions when connected
by Bluetooth.
26: TC FORGET
Sure? NO / YES or Not
Available
This initializes timecode function pairing data when connected by Bluetooth.
“Not Available” will be shown if no pairing data has been saved and initialization is
unnecessary.
27: BT ID
10LPro-******
This is the device name that will appear by default when searching for devices in the
dedicated control app. The serial number (******) of this unit will be shown.
28: FILE DELETE
Sure? NO / YES
This deletes the file currently shown on the display.
NOTE
The dedicated control app can be used during recording to change settings for items with in the “While recording (remote operation)” column. See
the manual for the dedicated control app for operation procedures.
