background image

4 – Operation

Mix File Management

The DM-24 automation system is capable of storing 
up to eight mixes of approximately eight thousand 
events per mix. Some control movements use up 
more events than others. Pressing a 

MUTE 

key uses 

one event, while a complex fader movement uses 
many.

Mix storage is made up of eight banks labeled 0 
through 7. One bank is used for storing a mix of 
approximately eight thousand events.

The Current Mix memory is capable of holding a mix 
of approximately thirty-two thousand events. When 
mixes exceed eight thousand events, they require 
more banks for storage. For example, a twenty-seven 
thousand event mix will use up four storage banks. It 
is possible to store two mixes of approximately 
thirty-two thousand events each in the DM-24.

The Mix Data

The mix data itself contains Initial Status and 
Dynamic data for all automated controls. The set-
tings of non-automated controls are not stored. 
(“Automated Controls” on page 4) In order to store 
the settings of non-automated controls such as Effect 

parameters or the 

DIGI-TRIM

 values, those settings 

must be stored in a Library. The mix data and library 
data may then be archived via a MIDI SysEx dump to 
a sequencer or other SysEx storage device.

TEAC CORPORATION

 

Phone: (0422) 52-5082

3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan

TEAC AMERICA, INC.

Phone: (323) 726-0303

7733 Telegraph Road, Montebello, California 90640

TEAC CANADA LTD.

Phone: 905-890-8008  Facsimile: 905-890-9888

5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada

TEAC MEXICO, S.A. De C.V

Phone: 5-851-5500

Campesinos No. 184, Colonia Granjes Esmeralda, Delegaacion Iztapalapa CP 09810, Mexico DF

TEAC UK LIMITED

Phone: 01923-819699

5 Marlin House, Croxley Business Park, Watford, Hertfordshire. WD1 8TE, U.K.

TEAC DEUTSCHLAND GmbH

Phone: 0611-71580

Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany

TEAC FRANCE S. A.

Phone: 01.42.37.01.02

17 Rue Alexis-de-Tocqueville, CE 005 92182 Antony Cedex, France

TEAC BELGIUM NV/SA

Phone: 0031-162-510210

Oeverkruid 15, NL-4941 VV Raamsdonksveer, Netherlands

TEAC NEDERLAND BV

Phone: 0162-510210

Oeverkruid 15, NL-4941 VV Raamsdonksveer, Netherlands

TEAC AUSTRALIA PTY.,LTD. A.B.N. 80 005 408 462 

Phone: (03) 9672-2400 Facsimile: (03)9672-2249 

280 William Street, Port Melbourne, Victoria 3000, Australia

TEAC ITALIANA S.p.A.

Phone: 02-66010500

Via C. Cantù 11, 20092 Cinisello Balsamo, Milano, Italy

Printed in U.S.A.

DM-24

Содержание DM-24





































Отзывы: