TASCAM DM-24 Automation
3
1 – Introduction
The DM-24 is capable of writing and reading mix
moves as well as editing and refining mix moves dur-
ing replay, all synchronized to time code. No external
computer is necessary, as all control of the automa-
tion is made from the DM-24ís control surface.
Automated mixes are stored internally on the DM-24
and can be off-loaded via a System Exclusive
(SysEx) MIDI dump to anything capable of storing
such data, such as a MIDI sequencer or MIDI data
filer.
Here are a few reasons to use mixer automation:
• Tedious moves, (such as mutes), that occur at the
same place in the program each time can be written
to the automation system for playback. This allows
you to focus on the creative aspect of listening and
mixing, instead of the mechanical aspect of press-
ing the mute keys at the right time, every time.
• Mix moves can be refined to your satisfaction then
the automation system will read those moves back
every time in exactly the same way.
• A mix can be recalled at a later time for further
refinement.
The DM-24’s automation system was designed to be
intuitive, using the mixer’s familiar control surface
and a minimum number of keystrokes, to stay out of
the way of the creative process of mixing.
Using This Manual
The following type conventions are used in this man-
ual:
BOLD CAPS
for physical keys on the mixerís control
surface (Automation keys are color coded purple.)
LIGHT CAPS
or
Light First Letter Caps
for on-screen con-
trols in the display
First Letter Caps for names of operational modes and
functions
