Tascam Digital Portastudio DP-24, Руководство пользователя

Страница: 72 / 108

72
TASCAM DP-24
10 - Mixing Down and Mastering Tracks
2. Set the mastering equalization on this screen.
The equalizer parameters are as follows.
GAIN FREQ
HIGH
High gain
Setting range: ±12dB
(Default: 0dB)
High frequency
Setting range: 1.7kHz to
18kHz (Default: 10kHz)
MID
Mid gain
Setting range: ±12dB
(Default: 0dB)
Mid frequency
Setting range: 32Hz to
18kHz (Default: 1.0kHz)
LOW
Low gain
Setting range: ±12dB
(Default: 0dB)
Low frequency
Setting range: 32Hz to
1.6kHz (Default: 100Hz)
Use the HIGH, MID, and LOW GAIN knobs to adjust
the gain.
Use the HIGH, MID, and LOW FREQ knobs to adjust
the center frequency.
Use the MID Q knob to set the MID FREQ bandwidth.
Setting range:
0.25
to
16
(Default:
0.5
)
You use the EQUALIZER ON/OFF button to turn the
equalizer on/off.
NOTE
Q refers to the center frequency of the equalizer divided
by the bandwidth. A high Q value reduces the cut and/
or boost applied to the frequencies. Depending on the
equalizer settings, the graph at the top of the screen
changes.
3. After making the settings, press the F1 (
g
) button
to return to the
Mastering
screen.
4. The
EQ
item state of the
Mastering
screen is
shown as
ON
or
OFF
.
Using mastering compression
You can choose between a single band and a multi-band
type of compressor.
Multi-band compressors allow independent settings for
the low, mid and high frequency ranges, so you can adjust
the overall volume balance. By using compression, you
can also reduce unwanted peaks and increase the overall
gain in order to raise the volume, creating a mastered
sound with greater impact.
1. When the
Mastering
screen is displayed, press
the F2 (
COMP
) button to open the
COMP MULTI
screen.
2. Press the F3 (
LIBRARY
) button to open the library
list pop-up screen.
3. Use the JOG/DATA dial or the CURSOR (
5
/
b
)
buttons to select (blue highlight) the desired
library, and then press the F4 (
t
) button.
After the library is read, the display returns to the
COMP MULTI
screen.
4. When using the multi-band compressor, move the
cursor to the band display area, use the JOG/DATA
dial to switch among the bands, and then set the
parameter for each band as desired.
Multiband type
Single band type