TASCAM BD-MP1
9
p
AVCHD and the AVCHD logo are trademarks of Panasonic
Corporation and Sony Corporation.
p
“x.v.Color” and “x.v.Color” logo are trademarks of Sony
Corporation.
p
Supply of this product does not convey a license nor imply
any right to distribute MPEG Layer-3 compliant content
created with this product in revenue-generating broadcast
systems (terrestrial, satellite, cable and/or other distribution
channels), streaming applications (via Internet, intranets
and/or other networks), other content distribution systems
(pay-audio or audio-on-demand applications and the like)
or on physical media (compact discs, digital versatile discs,
semiconductor chips, hard drives, memory cards and the
like). An independent license for such use is required. For
details, please visit http://mp3licensing.com.
p
TASCAM is a registered trademark of TEAC Corporation.
p
Other company names, product names and logos in this
document are the trademarks or registered trademarks of
their respective owners.
Information is given about products in this manual only
for the purpose of example and does not indicate any
guarantees against infringements of third-party intellectual
property rights and other rights related to them. TEAC
Corporation will bear no responsibility for infringements on
third-party intellectual property rights or their occurrence
because of the use of these products.
With the exception of personal enjoyment and similar uses,
copyrighted materials belonging to third parties cannot
be used without permission from the rights holders in
accordance with copyright law. Please use the equipment
appropriately.
TEAC Corporation will bear no responsibility for rights
infringements committed by users of this product.
Precautions for placement and use
p
The operating temperature range of this unit is 5–35 °C.
p
Do not install this unit in the following types of locations.
Doing so could make the sound quality worse or cause
malfunction.
Locations with frequent vibrations
Near windows or other places exposed to direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
p
Install the unit so that it is level.
p
To enable good heat dissipation, do not place anything on
top of the unit.
p
Do not place the unit on top of a power amplifier or other
device that generates heat.
Using the TEAC Global Site
You can download updates for this unit from the TEAC Global
Site:
http://teac-global.com/
In the TASCAM Downloads section, select the desired language
to open the Downloads website page for that language.
Product registration
Customers in the USA, please visit the following TASCAM
website to register your TASCAM product online.
https://tascam.com/us/
Beware of condensation
Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change. To prevent this, or if this occurs, let the unit sit for one or
two hours at the new room temperature before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not wipe
with chemical cleaning cloths, thinner, alcohol or other
chemical agents. Doing so could damage the surface or cause
discoloration.
Notes about power supplies
p
Insert the included power cord all the way into the AC IN
connector.
p
Do not connect a power supply other than one that is 100V
AC (50/60Hz).
p
Hold the power cord by its plug when connecting or
disconnecting it.
