TASCAM BD-MP1
23
Audio Settings
Audio Output
Function
Options
Explanation
S/PDIF
Bitstream/PCM/Off
This selects the digital audio signal format.
HDMI
Bitstream/PCM/Off
This selects the HDMI audio format.
FS Setting
48 kHz/96 kHz/192 kHz
This selects the sampling frequency.*
Volume Control
Enable/Disable
Volume up/down operations can be enabled or disabled.
Dolby DRC
Off/On/Auto
Set the dynamic range to Off, On or Auto.
* The downsampling frequency used during audio playback for signal processing inside the unit can be set. If an audio signal is played that
has a sampling frequency higher than the selected value, it will be converted to the set sampling frequency. PCM signals output by HDMI
and S/PDIF connectors will also be downsampled to the set value.
Speaker Settings
Function
Options
Explanation
Configuration
2.x/3.x/4.x/5.x/6.x/7.x
Select the channel configuration.
p
2.x: Lt/Rt*, Stereo
p
3.x: LCR
p
4.x: LRLsRs
p
5.x:
p
6.x:
p
7.x: C+LR+LsRs+LsrRsr
Test Tone
More…
Select to play a test tone from the speakers. **
p
Subwoofer selection: None, Single
p
Speakers: C, L, R, SW1, Ls, Rs, Lsr, Rsr
* Lt/Rt is a two-channel downmix output that supports Dolby surround. When played on an ordinary stereo system, the L and R
channel balance could be degraded. If this occurs, select Stereo.
** Trim adjustment overview
Digital full scale (-10dB) is shown as “0” to make adjustment of surround channel speaker volume differences easier.
If trim adjustment is unnecessary, use the default setting (+10).
S/PDIF Output Configuration
Function
Options
Explanation
Configuration
p
FL/FR
p
SL/SR
p
C/SW
p
SBL/SBR
p
L/R (-10dBF)
The selection items are the same signals that are output from the
analog outputs on the back of the unit.
The selected analog outputs are output from the digital audio
output (COAXIAL) connector.
* The maximum audio level will become -10 dBF only for L/R
System Information
Use to check the revision and the MAC address used by this unit.
o
Model: BD-MP1
o
MAC: xx-xx-xx-xx-xx-xx
o
Revision: xxx.xxx