12
ASSEMBLY
TOOLS REQUIRED
* TIN SNIPS
* SOCKETS AND WRENCHES - 9/16”, 3/4”, 15/16”,
AND 1-1/4”. (IMPACT WRENCH IS PREFERRED)
1. With Rotary Tiller still in the rack, set it on a level
spot for assembly.
2. Remove the PTO Shaft, leaving the chains attached
to the PTO.
3. Remove A-Arms and Back Straps using a 3/4”
wrench. Set aside after removing.
*NUTS AND BOLTS CAN BE DISCARDED
*Remove
hardware box
and set aside.
(Hardware box
contents are
listed on
pg. 29)
4. Remove the PTO shield.
5. Insert lift strap and slowly lift Rotary Tiller.
*BE CAUTIOUS OF WEIGHT SHIFTING WHEN
LIFTING.
6. With pressure relieved from the bolts, remove the
bolts, from the tiller rack, using 3/4” wrenches.
*Discard bolts.
