Tarter RT104BL Скачать руководство пользователя страница 8

8

SAFETY

SAFETY GUIDELINES

At Tarter, we care about your safety. Most accidents 
can be avoided by a few seconds of thought and a 
careful approach to handling equipment. You, the 
operator, can avoid many accidents by observing the 
following precautions and insist those working with 
you follow them too.

If you need assistance or a replacement manual and 
safety decals, go to Tarterusa.com or call 1-800-RED-
GATE.

PLEASE READ YOUR TRACTOR/AUV/UTV (POWER 
UNIT) MANUAL BEFORE ASSEMBLING OR 
OPERATING YOUR TARTER IMPLEMENT.  

In order to provide a better view, certain photographs 
or illustrations in this manual may show an assembly 
with a safety shield removed. However, a Tarter 
implement should never be operated in this condition. 
Keep all shields in place. If shield removal becomes 
necessary for repairs, replace the shield prior to use.

Replace any safety decal that is illegible or missing. 
Location of such safety decals are indicated in this 
manual.  

Never use alcoholic beverages or drugs that can 
hinder alertness or coordination while operating the 
power unit or the Tarter implement. Consult your 
doctor about operating this machine while taking 
prescription medications.

Under no circumstances should children under the 
age of 18 be allowed to operate the power unit or the 
Tarter implement. Do not allow persons to operate 
or assemble the Tarter implement until they have 
read this manual and have developed a thorough 
understanding of the safety precautions and how it 
works. Review the safety instructions with all users 
annually.

This Tarter implement can be dangerous to children 
and persons unfamiliar with its operation. The 
operator should be a responsible, properly trained and 
physically able person familiar with farm machinery 
and trained in this Tarter implement’s operations.

Always use a power unit equipped with a Roll Over 
Protective System and seat belts(ROPS).  Keep your 
seat belt securely fastened because falling off can 
result in your death from being run over or crushed. 

Always keep a foldable ROPS system in the “locked 
up” position at all times.

Never exceed the limits of any piece of machinery, 
whether the power unit of the Tarter implement. If its 
ability to perform a job safely is in question 

DO NOT 

TRY IT.

Do not modify the Tarter implement in any way. 
Unauthorized modification could result in serious 
injury or death and may impair the function and life of 
the implement.

In addition to the design of this implement, including 
safety signs and safety equipment, hazard control 
and accident prevention are dependent upon the 
awareness, concern, prudence, and proper training 
of personnel involved in the operation, transport, 
maintenance and storage of the Tarter implement. 
Refer also to safety messages and operation 
instruction in each of the appropriate sections of the 
power unit and Tarter implement manuals. Heed the 
safety signs affixed to both the power unit and Tarter 
implement.

Follow all safety rules and safety decal information. 

Your Tarter implement is attached to a power unit. 
You must know the controls of your power unit and 
how to stop the engine and implement quickly in an 
emergency. All operators must be capable to safely 
operate the power unit, its attachments, and all 
controls. 

PREPARATION

 

Always wear relatively tight and belted clothing to 
avoid getting caught in any moving part. Wear sturdy, 
rough-soled work shoes and protective equipment for 
eyes, hair, hands, ears, and head.  Wear respirator or 
filter mask when appropriate. 

DANGER: Failure to follow instructions or 
safety rules can result in serious injury or 
death.

DANGER: DO NOT allow anyone to operate 
the power unit or the Tarter implement 
without proper instruction.

Содержание RT104BL



































Отзывы: