10
SAFETY
OPERATION
Never operate the power unit or the Tarter implement
while under the influence of alcohol or drugs.
Operate only in daylight or satisfactory artificial light.
Do not allow bystanders in the area when operating,
attaching, removing, assembling or servicing the
power unit or Tarter implement.
Never discharge directly toward people, animals or
property.
Ensure the rear-guard assembly is in place to reduce
the possibility of objects being thrown.
This Tarter implement is intended for agricultural
applications only. Do not operate within 300 feet of
bystanders or public roads or highways.
Keep hands, feet, hair and clothing away from the
power unit and Tarter implement while the power unit
engine is running. Stay clear of all moving parts.
Always sit in the power unit seat when operating
controls or starting engine. Securely fasten seat
belt, place transmission in neutral, engage brake
and ensure all other controls are disengaged before
starting the power unit engine.
DO NOT EXCEED
the power unit PTO at 540 RPM.
Look down and to the rear and make sure area is clear
before operating in reverse.
REVERSE OPERATION IS
NOT RECOMMENDED.
Be aware that turning the power unit tightly may cause
the Tarter implement to come in contact with the rear
wheels of the power unit and cause damage or injury.
Watch for hidden hazards on the terrain during
operation.
Do not operate on steep slopes.
Do not stop, start or change directions suddenly on
slopes.
Use extreme care and reduce ground speed on
slopes and rough terrain. When encountering rough
terrain, reduce the power unit speed to minimize the
horizontal movement of the Tarter implement.
Stop the power unit and equipment immediately
upon striking an obstruction. Turn off engine, remove
key, inspect, and repair any damage before resuming
operation.
MAINTENANCE
Make certain all movement of the power unit and
Tarter implement components has stopped before
approaching for service.
Before detaching the power unit from the Tarter
implement or performing any service or maintenance,
follow these steps: disengage power to the power unit,
lower the 3-point hitch and all raised components to
the ground, set parking brake, stop engine, remove
key and unfasten seat belt. Before performing any
service or maintenance, disconnect driveline from
tractor PTO.
Before working underneath the power unit or a Tarter
implement, carefully read this manual’s instructions,
disconnect driveline, raise implement, securely block
up all corners with jack stands, and check stability.
Secure blocking prevents a Tarter implement from
dropping due to hydraulic leak down, hydraulic
system failures or mechanical component failures.
Never go underneath a Tarter implement (lowered to
the ground or raised) unless it is properly blocked and
secured. Never place any part of the body underneath
the power unit or a Tarter implement or between
moveable parts even when the engine has been
turned off. Hydraulic system leak down, hydraulic
system failures, mechanical failures, or movement of
control levers can cause a Tarter implement to drop or
rotate unexpectedly and cause severe injury or death.
Follow the power unit and Tarter implement manual
for working underneath and blocking procedures.
Always wear relatively tight and belted clothing to
avoid getting caught in moving parts. Wear sturdy,
rough-soled work shoes and protective equipment for
eyes, hair, hands, ears, and head. When appropriate
wear a respirator or filter mask.
