18
4. Round off all sharp edges and remove burrs.
Grease sliding profiles. No other changes may be
made to PTO drive shaft and guard.
5. Chains must be fitted so as to allow sufficient
articulation of the shaft in all working positions.
6. The PTO drive shaft must not be suspended from the
chains.
Final Inspection and Adjustments
IMPORTANT: PTO driveline may be too long for some tractor models, causing tractor transaxle damage.
Modify driveline if necessary.
Attach Rotary Tiller to tractor and check tiller-to-tractor driveline telescoping length clearance.
(See MAINTENANCE BEFORE EACH USE in Lubrication and Maintenance section.)
Modify PTO Driveline (If Necessary)
1. To adjust the length, hold the half-shafts next to each
other in the shortest working position and mark them.
2. Shorten inner and outer guard tubes equally.
3. Shorten inner and outer sliding profiles by the same
length as teh guard tubes.
MODIFY PTO DRIVELINE
MODIFYING PTO
