14
ASSEMBLY
18. Using bolt, split lock washer, and nut, provided
with PTO Shaft, attach the PTO Shaft to the input
shaft of the gearbox.
19. Using 3/4” wrench and socket, tighten through
the access hole.(Angled ratchet wrench)
20. Attach chain on the gearbox end of the PTO shaft.
21. Assembly of your Rotary Tiller is now complete.
15. Using the following:
• 1/4”-20 x 3/4” hex bolt
• Nylon Lock Nut
• Flat washer
Remove the cap on the manual holder. Using
a 7/16” wrench and socket, attach the manual
holder to the left lift Arm. Tighten and place the
cap back on the manual holder.
16. Place the chain and shackle on the back of the
tailgate and set to desired setting.
17. Place the lift pins the lower holes of the lug. Use
an adjustable wrench and large screw driver to
tighten.