Targa Now 8821, Руководство пользователя, Страница: 12 / 192

4
Safety
Safety
EMC and Safety Regulations
This device is compliant to the standards EN 55022, EN 55024, EN 61000-3-2,
EN 61000-3-3 and EN 60950. The included RF appliances, e.g. WLAN, remote
control etc., comply with the R&TTE Directive (1999/5/EC).
Any changes to the equipment other than those recommended by the manufacturer
may result in these Directives not being met any longer. In order to ensure the
E lectro m agnetic C ompatibility (EMC) of this equipment, follow the instructions in
this User's Guide.
Notice
You’ll find the signed CE Declaration of Conformity on the website www.
service.targa.co.uk under Targa Now 8821/Manual (English Service site).
Notice to the User
This equipment has been tested and found to be within the limits for interference
suppression. When using external signal cables, please note the following: When
replacing any of the signal cables provided by the manufacturer, the user must
ensure that the EMC guidelines are followed. The shielding characteristics of all
replaced cables must be at least equivalent to the original cables. You may only use
shielded cables, and only devices equivalent to the safety and EMC standards of
this product may be connected.
If you do not follow the above-mentioned points, these Directives are no longer met.
Laser (Safety Warning)
This device contains a laser system and is rated as a "Class 1 Laser Product".
Please refer to the Operating Instructions, and read them carefully for information
on correct operation. Keep them as reference for future use. If you encounter
problems with your PC, please contact qualified service or maintenance personnel.
In order to avoid direct contact with the laser beam, you must not open the case of
optical drives such as the DVD-ROM or DVD burner.
CAUTION! Laser radiation when cover is removed!