Taramps Tarsafe TW20 G4, Руководство пользователя

Страница: 6 / 15

7.1) Test Presence Function:
- The LED will flash informing:
1 flash= PresenceTransmission
ON
2 flashes= PresenceTransmission OFF
- Hold the Power and Auxiliary keys pressed;
- Release after the LED goes out;
Disable the Presence Function on the TR2-P control
Operation:
It is not necessary to move the control away from the vehicle, to test the lock, just disable the automatic
transmission of the TR2-P control, turn the ignition on , close the doors and wait.
7) Lock Function by Presence/ Distancing
- Release after the LED goes out;
Activate the Presence Function on the TR2-P control
1 flash= Presence Transmission ON
- Hold down the Power and Auxiliary keys;
- The LED will flash informing:
2 flashes= PresenceTransmission OFF
Operation:
With the ignition on and doors closed, pulling the TR2-P control away from the vehicle automatically
activates the distancing lock. After the programmed time (Beep 9 of the configuration by the master),
the ultrasound LED starts flashing the audio will be turned off, the siren and turn signals will go off, ther
10 seconds, the engine will start failing until it is definitively blocked. To cancel the lock, bring the TR2-P
control closer to the vehicle and wait for the automatic transmission or press the end key.
Activate Presence Function in the Alarm Central
- Hold the master pressed until beep 7.
2 Beeps =Presence Function OFF
1 Beep = Presence Function ON
- With the door open, turn the ignition on.
- To change, press 1x (once) to Enable or 2 x (twice) to Disable.After turning off the
ignition, the alarm will confirm the new setting with beeps.
- The alarm will respond informing:
Set Time for Locking, 1, 2 or 3 minutes
- With the door open, turn the ignition on.
2 Beeps = Lock in 2 Minutes
- Hold the master pressed until beep 9.
- The alarm will respond informing:
3 Beeps = Lock in3 Minutes
1 Beep = Lock in 1 Minute
To change, press the Master key the number of times referring to the desired
time. Each time you press the Master, the alarm confirms with 1 beep.After
turning the ignition off , the alarm will confirm the new setting with beeps.
+
MASTER
Attention: Function canceled from the factory, must be enabled by Beep 7.
In G4 alarms it is possible to enable the Presence Functions by Beep 7 and the Lock by
Secret Button Beep 8.
+ +
IGNITION
ON
START
OFF
MASTER
DOOR OPEN
+
Configure
1X Enable
2X Disable
Select the Beep 7 function
+ +
IGNITION
ON
START
OFF
MASTER DOOR OPEN
+
Configure
1X = 1 minute
2X = 2 minutes
3X = 3 minutes
Select the Beep 9 function
TR2-P Control Required
05