Taramps Tarsafe TW20 G4, Руководство пользователя

Страница: 11 / 15

11
Window Activation Setup (continuation)
- With the door open, turn the ignition on.
- The alarm will respond informing:
1 Beep = Universal
2 Beeps = VW G5
3 Beeps = FIAT
5 Beeps = VW UP
4 Beeps = VW G6
- Hold a master pressed until beep 11.
Set Signal for window/Electric Lock activation
6 Beeps = MOBI
To change, press the Master key the number of times referring to the desired
setting. Each time you press the Master ,the alarm confirms with 1 beep.
After turning the ignition off, the alarm will confirm the new setting with
beeps. +
MASTER
+
Configure
1X = Universal
2X = VW G5
3X = FIAT
4X = VW G6
5X = VW UP
6X = MOBI
+ +
IGNITION
ON
START
OFF
MASTER
DOOR OPEN
Select the Beep 11 function
11.1 Universal Mode : Negative signal 15 seconds.
11.2 VW G5 Mode: Gol, Saveiro, Voyage generation 5) Manufactured after February 2009, with
original window and power lock. Close the windows, lock and unlock the doors. Connect the
Green/Black alarm wire to pin 5 of the original panel 23-way connector, located above the
accelerator pedal. DO NOT connect Red / Black and Red / Yellow (lock and unlock) wires.
To open the windows, hold the control off button pressed with the alarm off.
To open the Trunk, connect the Gray wire from the alarm to the Brown / Red wire, pin 34 from
the original central located above the fuse box.
NO RESISTOR NEEDED.
11.5 VW UP: Only LOCK and UNLOCK.
Functions: lock, unlock, close and open the windows.
11.4 VW G6 and G7 mode: Gol, Saveiro, Voyage generation 6 and7), with original power
windows. Connect the Red / Black alarm wire to the Brown / Red wire, pin 36, from the original
central located above the fuse box.
11.3 FIAT Mode: Palio, Idea, Punto and Linea with automated power windows, closeand
open.Connect the Green / Black alarm wire to pin 8 on the original central , to the Palio and Idea
line located behind the glove compartment.On Linea and Punto, Red / Black wire in the central
located behind the fuse box.
11.6 MOBI: New Uno after 2015, MOBI and ARGO, with original power windows.Connect the
Green / Black alarm wire to the Brown / Green wire of the original alarm 6-way harness located
on the steering column.
Connect the Red / Black alarm wire to the Brown / Green wire located on the left column of the
vehicle.