Functions, inputs & outputs
HIGH PASS FILTER (HPF):
Variable setting from 8Hz to 30Hz, which determines the start of the
amplifier's operating frequency.
FREQ.:
Set the frequency of bass boost from 35Hz to 60Hz.
For speaker associations, the impedance to consider is the resulting impedance:
6 - MONITOR:
Accessory connection that has the function of monitoring the amplifier, displaying
clipping and protection status.
(Included accessory)
.
7 - SPEAKER:
SPEAKER: Output (positive and negative) for connecting transducers (speakers). Follow
the indicated polarity.
3 - GAIN:
Adjusts the input sensitivity of the amplifier, allowing a perfect adjustment to the output signal
levels of various head units models on the market. It is possible to adjust from 4V (minimum sensitivity) to
0.2V (maximum sensitivity).
1 - IN:
Input of signal to be amplified. Connect the to the RCA output of the Head Unit using good
shielded cable to avoid noise interference.
4 - CROSSOVER
BOOST:
Set the boost level from 0 to + 10dB at the frequency set in FREQ.
5 - BASS BOOST
2 - OUT:
Audio signal output. Sends the same input (IN) signal to another amplifier, allowing cascading.
LOW PASS FILTER (LPF):
Variable setting from 60Hz to 200Hz, which determines the end of the
amplifier's operating frequency.
09
ENGLISH
IN
OUT
0.2
GAIN
4
V
SPEAKER
MONITOR
BASS BOOST
BOOST
+10
0
dB
FREQ.
60
35
Hz
Hz
Hz
LOW PASS
30
8
CROSSOVER
HIGH PASS
200
60
2
1
3
4
5
6
7
Quantity
Impedance
Power
Resulting
Impedance
4 x 4 OHMS
3 x 4 OHMS
1 OHM
1.33 OHMS
2 OHMS
2 x 4 OHMS
1.5 OHMS
4 x 6 OHMS
0.5 OHM
D2+D2
1 OHM 1 OHM
0.5 OHM
3000W RMS
Loudspeakers
Parallel connection example
Due to the presence of voltage at the output terminals when the product is turned on,
avoid contact with them. Risk of electric shock.
CAUTION