Taramps DS800X2, Инструкция по эксплуатации

Страница: 9 / 14

You can find below some key recommendations to get the most out of your amplifier:
7 - The amplifier must be installed by a qualified professional.
4 - The gauge of power supply wiring is extremely important both to reach the desired
amplifier output and to the amplifier's safety. Use the wire gauge recommended in this
manual (page 11). Using wire gauges below the specified value will result in power loss and
overheating of cables. It is important that the power supply cables are the shortest possible;
1- Read this instruction manual carefully before carrying out any connection;
6 - In order to avoid interferences, the signal cable (RCA) must be away from the original
wiring of vehicle or from any other power supply cable;
3 - It is compulsory to install fuses to protect against overloading. The fuse or circuit breaker
must be installed as close as possible to the battery and sized up according to the amplifier;
Any connection to the amplifier input or output must be carried out when amplifier is
off;
2 - Check carefully the polarity of power supply wiring (battery's positive and negative
terminals) loudspeakers and the minimum speaker impedance;
5 - Amplifier must be installed in a firm and ventilated area;
Taramps reserves the right to modify the contents of this document at any time without prior notice and does
not have the obligation to apply the changes in units which were previously produced.
This manual covers all features, operations and instructions to solve any doubt that may arise
during the installation. Please take some time to read it carefully in order to ensure the proper
installation and the use of all benefits that this product can offer.
It was developed in a modern laboratory and with the latest technology.
Congratulations on your purchase of a Taramps product.
For questions, please call +55 (18) 3266-4050 , e-mail support@taramps.com.br or visit
www.taramps.com.br .
08
Key recommendations
Introduction