Taramps DS800X2, Инструкция по эксплуатации

Страница: 10 / 14

Functions & inputs
2 3 1 4
LED indicator
ON: Indicates that amplifier is on.
1 - INPUT: Inputs of signals to be amplified. Connect these signals to RCA outputs of CD/DVD Player,
using good quality shielded cables to avoid noise interference.
2 - LEVEL: It sets the amplifier input sensitivity, which allows an optimal adjustment to the output
signals levels of nearly all models of CD/DVD Players found in the market.
4 - CROSSOVER: Set the operating mode of amplifier :
3 - HPF - (HIGH PASS): Variable adjustment from 80Hz to 2.2KHz, which determines the beginning
of the amplifier operating frequency.
SELECTOR POSITION - FULL
Amplifies the whole audio range, responding from
10Hz to 22KHz. This function is normally used when
there is an external crossover in the system.
SELECTOR POSITION - LPF - (LOW PASS)
Amplifies only sub bass and bass, since the response
is limited to 80Hz (-12dB/8ª), the optimal frequency
for sub-woofers.
SELECTOR POSITION - HPF - (HIGH PASS)
Amplifies signals with more intensity from the
selected frequency ranging from 80Hz to 2.2KHz (-
6dB / 8ª). This type of function is used for playback of
mid-bass, mid-range speakers, drivers or tweeters.
Audio track
10Hz
-3dB
22KHz
Audio track
Audio track
10Hz
-3dB
22KHz 80Hz
CROSSOVER
HPF LPF
FULL
HIGH PASS
80Hz 2.2KHz
10Hz
-3dB
22KHz 2,2KHz 80Hz
↔
09