Taramps DS800X2, Инструкция по эксплуатации

Страница: 12 / 14

Installation
CAUTION: All connections to power supply, input and output connectors must be
carried out only with amplifier off.
Remote cable ___________________ __________________________________
_
18 AWG
Calculated considering a maximum length of 4m. Distance greater than this, you will need
to increase the cable gauges.
Check polarity and never reverse power supply cables due to the risk of damage to the
amplifier.
Output cables wire gauge_______________________________ _____________15 AWG
Positive / negative power supply cable ___________________ ________________ 7 AWG
It is compulsory to install protection fuses or circuit breakers as close as possible from
batteries.
Caution: Using wire gauges below the recommendation will result in power loss and
overheating of wiring.
Protection fuse or circuit breaker __________________________________________ 60A
Recommended wire gauge & fuse
11
Note: In case of compression driver horns and
tweeters you must install a passive filter in the
positive terminal of the same ones (Consult
transducer’s manufacturer manual).
REM
POWER
BRIDGED 4
2 2
REM
POWER
BRIDGED 4
2 2
4 ohms 4 ohms
2 ohms 2 ohms
DS800X2 2
DS800X2 1
Connection example 01 Connection example 02
4 ohms
2 ohms
DS800X2 2
DS800X2 1
Subwoofer
Woofer
Remote Cable 18 AWG
10mm² (7 AWG)
10mm² (7 AWG)
12V
GND
RCA Cable
Taramps
*Illustrative images
Head Unit
Note: Required battery bank capacity: At
least 60Ah
DISJUNTOR