Short-circuit Protection:
Shutdown the amplifier when detect a short- circuit or impedance
lower than the supported at the output.
Output & power supply connector
2 OHMS
2 OHMS
For amplifier 1 ohm
Resulting
impedance:
1 OHM
4 OHMS
4 OHMS
For amplifier 2 ohms
Resulting
impedance:
2 OHMS
REM
POWER
BRIDGED 4
2
2
1
2
To combine speakers, the resulting impedance must be taken in consideration.
DS 800X2 (2 Ohms)
- For STEREO connections, the minimum impedance is 2 ohms at each
channel; for BRIGDED connections is 4 ohms.
DS 800X2 (1 Ohm)
- For STEREO connections, the minimum impedance is 1 ohm at each
channel; for BRIGDED connections is 2 ohms.
1 - OUTPUT:
To connect the speakers. Follow the polarity and the minimum impedance
recommended.
See the examples below:
2 - POWER (Power Supply Connector):
The connector terminal (+) must be connected to the
battery's positive pole with a 7 AWG wire gauge. The connector terminal (-) must be properly
connect to the battery's negative pole with a same wire gauge. The remote terminal must be
connected to the CD/DVD Player REMOTE output with a
18 AWG
wire.
10
Protection system
Содержание DS800X2
Страница 1: ...2 OHMS 2 x 400W RMS ...
