4
805-0039 Rev F
Fig. 2
B.
Follow the labeling on the assembly to ensure proper product connection.
C.
Lock inlet line fittings into the valve module assembly before turning on syrup or
water. To lock the fitting, lightly press down on the red clip. Lightly pull up on the
clip to allow fitting removal. (Caution: Forcibly removing the red clip from the valve
body may damage the clip).
Fig. 3
D.
The bar dispenser assembly comes from the factory pre-attached to the valve
module assembly. Before proceeding to the next step verify that the red retainer
clips are in the locked position (down) (
Fig. 3
).
E.
Rotate the yellow shut-off stem 90 degrees to
“Off”
position to check for
inlet connection leaks (
Fig. 4
).
Off
Fig. 4
Содержание Rattler II
