60
ɡ
Installing the USB Device Driver
To install
"
RTR-5W for Windows
"
, it is necessary to have Administrator rights (Computer
Administrator) for the computer in which you wish to install it.
For Windows
®
XP
Before installing the USB device driver, make sure to install the software
"
RTR-5W for
Windows
"
fi rst.
1.
Turn on your computer and open Windows.
2.
Connect the RTR-50 (Repeater) to the Computer with a USB cable. For how to
connect to a computer, see the User's Manual that accompanies your RTR-50
Wireless Communication Port.
3.
By connecting the RTR-50 to the computer, the [Found New Hardware Wizard] will
automatically open.
If that window does not automatically open, see the next page. If the following
window will appear, check [No, not this time] and then click the [Next].
Windows such as this will not appear for "No Service Pack" and "Service Pack 1"
versions of Windows XP.
[Next]
Button
Check
4.
By checking [Install the software automatically (Recommended)] and clicking
[Next], the software will automatically be installed.
[Next]
Button
Check
5.
After completing installation, click the [Finish] Button.
