evolution 5000 E5780 and E5782 Encoder
8
2.2 Operating
Voltage
All Encoder models are fitted with a wide-ranging power supply. It is
suitable for supply voltages of 100-120 Vac -10% +6% or 220-240 Vac
-10% +6% at 50/60 Hz nominal.
CAUTION
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your business, consult a qualified electrical engineer or your
local power company.
NOTE
Refer to the Reference Guide for details of the colour codes used on
the mains leads.
See Table 2.2 for fuse information and also the Reference Guide for a
full power supply specification.
2.3
Power Cable and Earthing
Check that the power cable is suitable for the country in which the
Encoder is to be used.
WARNINGS
1. The Technical Earth is not a Protective earth for electric shock
protection.
2. This unit must be correctly earthed through the moulded plug
supplied. If the local mains supply does not have an earth
conductor do not connect the unit. Contact Customer Services
for advice.
3. Before connecting the unit to the supply, check the supply
requirements in Annex B of the Reference Guide.
