evolution 5000 E5780 and E5782 Encoder
24
5 Typical
Configurations
5.1
Stand-alone ATSC Encoder (SD)
To put the Encoder into a typical configuration for a stand-alone ATSC
Encoder perform the following:
!
Navigate to the
Config Menu
.
!
Load Active Config – select the ‘Standard (ATSC)’ configuration
which has the video bit-rate that is required.
A summary of the standard ATSC configuration is:
Syntax = ATSC
Mux bit-rate = 19.392658 Mbit/s
Video Source = NTSC with pedestal
Video Encoding Profile = MP@ML (4:2:0)
Compression Mode = Standard
Audio Channel A = Analogue Source, Dolby (AC-3) encoding at
384 kbit/s
Audio Channel B = Off
Closed captions = EIA-708B sourced from line 21 of the video.
!
Navigate to the
Service Info Menu
and configure the SI
parameters such as channel name, and network name as required.
It may also be necessary to modify some of the other default settings to
suit the particular installation, see the Reference Guide for details.
