evolution 5000 E5780 and E5782 Encoder
13
3
Operating the Equipment From the Front Panel
3.1 Introduction
The front panel display and keypad may be used to configure, control
and monitor the Encoder when an external control system is not used.
3.2
Establishing Local Control
3.2.1
Input Monitor / Keyboard Lock
At power-on the Encoder runs through a boot sequence (boot time
without any option modules is approximately 45 seconds). An initial
Input Monitor screen is shown. Figure 3.1 shows SD mode (HD not
available in build version 3.3).
Figure 3.1: Input Monitor in SD
The softkeys can be locked out to prevent inadvertent operation (see
the key icon in Figure 3.1). Press the softkey adjacent to the key icon.
This shows the Keyboard Lock screen. Press the Yes softkey to disable
the softkeys. They are all disabled with the exception of Unlock.
To enable and restore the softkey functions, press the Unlock softkey.
This shows the Keyboard Lock screen. Press the Yes softkey.
Key icon, shown in the unlocked
position.
