D14128.02—NOVEMBER 2008
45
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
About the API
Address status information with xStatus
To read status from the system just type the root command (xStatus) followed by the path (address expression):
xStatus <address expression>
Query status information
Status type commands returns information about the system and
system processes. You can query all information or just some of it.
To address status information enter the xStatus command followed by
an address expression (XPath or TANDBERG SimplePath).
You can set up the xStatus read command to address all information
or just some of it, see the examples to the right for illustrations.
Example 1: Query all ongoing Call information:
xstatus call
*s Call 8 Status: Connected
*s Call 8 Direction: Outgoing
*s Call 8 Protocol: “h323”
*s Call 8 RemoteNumber: “558458”
*s Call 8 CallbackNumber: “h323:[email protected]”
*s Call 8 DisplayName: “[email protected]”
*s Call 8 CallRate: 768
*s Call 8 Encryption Type: “Aes-128”
OK
Example 2: Query the protocol for a call:
xstatus call protocol
*s Call 8 Protocol: “h323”
OK
