D14128.02—NOVEMBER 2008
35
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
About the API
Connecting to the codec
Accessing XACLI
XACLI can be accessed through Telnet and SSH via the LAN interface
or through the COM port by connecting a serial cable to the serial
interface connector, referred to as the COM port.
The COM port (RS-232) is a 9-pin, female, D-sub connector located
on the back of the TANDBERG Codec C90. See the illustration to the
right.
The port is configured as a DCE (Data Communications Equipment).
The COM port (RS-232) is default set to 38400 baud, 8 data bits,
none parity and 1 stop bit from factory. The port may also be referred
to as the Data port.
Telnet/SSH login
Telnet is by default disabled. This can be changed with a configuration
command: xConfiguration NetworkServices Telnet Mode: On/Off
xConfiguration NetworkServices Telnet Mode: On
•
Telnet/SSH login
User name is:
•
admin
Default password is:
•
TANDBERG
Serial port login
The serial port is password protected by default. The password
protection may be configured.
User name is:
•
admin
Default password is:
•
TANDBERG
The COM Port at TANDBERG Codec C90
Line in
Rev. Date
Prep.
Checked Change
-
-
-
Telecom AS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Part weight:
Sheet size:
Scale:
Surface treatment
Specification:
Material
Tolerances
Unit:
European
projection
Sheet 1 of 1
All materials, finishes, and proccesses
must comply with the RoHS directives
Dimensions without paint or finish
Flame class requirement: -
Processes
Type:
Manufacturer:
Type number:
Thickness:
Color:
Surface:
Glossiness:
Flame class:
UL reference:
3D CAD model file 116805 rev. 00Z+ is master
Saturn C70 Unit
116805 rev.
3172g
A3
mm
1:5
Line in
Rev. Date
Prep.
Checked Change
-
-
-
Telecom AS
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Part weight:
Sheet size:
Scale:
Surface treatment
Specification:
Material
Tolerances
Unit:
European
projection
Sheet 1 of 1
All materials, finishes, and proccesses
must comply with the RoHS directives
Dimensions without paint or finish
Flame class requirement: -
Processes
Type:
Manufacturer:
Type number:
Thickness:
Color:
Surface:
Glossiness:
Flame class:
UL reference:
3D CAD model file 116805 rev. 00Z+ is master
Saturn C70 Unit
116805 rev.
3172g
A3
mm
1:5
Serial port configurations
On the serial port the baud rate and password protection may be
configured.
The configuration command for the baud rate is:
xConfiguration SerialPort BaudRate: <9600/19200/38400/115200>
xConfiguration SerialPort BaudRate: 38400
•
The configuration command for login required is:
xConfiguration SerialPort LoginRequired: <On/Off>
xConfiguration SerialPort LoginRequired: On
•
Reboot.
The system requires a reboot for the changes to baud rate
and password protection to take effect.
NOTE:
When system boots up the baud rate of the boot messages is
38400 regardless of the baud rate set in the codec application.
