D14128.02—NOVEMBER 2008
112
Codec C90
System Integrator Guide
Contents
Introduction
Getting Started
Interfaces
About the API
xConfiguration
xCommand
xStatus
Cameras
Appendices
Contact us
Appendices
The software upgrade procedure
Contact your TANDBERG representative to obtain the software upgrade file.
Software upgrade
The
Upgrade
tab lets you select the software
upgrade file for TANDBERG Codec C90 and install
the new software.
Please follow the procedure described on this
page.
Open a web browser and enter the
1.
IP address to connect to the Codec
C90 by HTTP
Select the
2.
Upgrade
tab
Click
3.
Browse...
and locate the
upgrade file (.PKG)
Click the
4.
Install software
button to
start the installation.
Leave the system for a few minutes
5.
to allow the installation process to
complete. The upgrade process
takes about 4–5 minutes.