49 StorageLoader Installation and User Manual
5.2.2. StorageLoader Start Page
After successfully connecting to the StorageLoader from your browser, you will see the StorageLoader
Start page, Figure 5.2. This contains:
•
Choose language.
The language used last time will come up as the default language at start-up.
The default language is English.
•
Login for further use of Remote Management. The system has two levels of login:
The user name “Administrator” has full access level to the
Remote Management pages.
The user name “Operator” has limited access level to the
Remote Management, and cannot access the Settings and Maintenance pages.
By default the passwords are blank, i.e. type in the user ID and leave the password field blank. To
secure your system, change both passwords under Settings > Personalization, the first time Remote
Management is used.
Figure 5.2. Remote Management Start Page.
Note
StorageLoader network traffic is not encrypted, so anyone with physical access to
the network path will be able to access the information with a packet sniffer.
Passwords, however, are encrypted. It is not possible to reach the plaintext
password, but it is possible to sniff “the challenge key” and use it to gain access.
The system is therefore not safer than the network it is using.
If you need high security, make sure packets to and from the StorageLoader do
not leave the secure network, and employ separate encryption when traffic
traverses insecure networks.