21 StorageLoader Installation and User Manual
Figure 3.4 shows step 5 in the description:
Rack mounting kit mounted in rack with one
screw M6x12 in upper hole on both left and
right side.
On the rear side two screws must be used
on both left and right side.
Totally six screws are used to install the
“rack mounting kit” to the rack.
Figure 3.4. Rack mounting kit mounted in rack.
Mounting the StorageLoader to the Rack
Make sure that all the screws in the Rack Mounting Kit are tightened properly before installing the
StorageLoader in the rack.
Slide the StorageLoader on the rails from the front of the rack, as shown in Figure 3.5. Then fix the
StorageLoader using one M6x12 screw in front of the rack on both left and right side (see Figure 3.6).
Figure 3.5. Slide the StorageLoader in from the
front.
Figure 3.6. Fasten the front of the
StorageLoader to the rack using the M6x12
screws.
Transporting StorageLoader or Rack (optional)
To transport the StorageLoader in its shipping container or in a rack, make sure that the rails are
secured to the left side of the loader using the M5x8 screw. See Figure 3.7.
Figure 3.7. Fasten the rear of the StorageLoader to the rails.
Use the M5x8 screw on the left side (M5-
thread) to fasten the StorageLoader to
the rails’ backside.